With the wide application of High Speed Injection Molding Machine, more and more businesses are now paying attention to injection molding machine products. However, what is the difference between a high-speed injection molding machine and a general injection molding machine? This has obviously become a topic of popular discussion. In general, high-speed injection molding machines are all-electric motors, while ordinary injection molding machines are hydraulic injection molding machines. Compared with high-speed thin-wall injection molding machines, hydraulic Plastic injection machine operate at a slower speed. The all-electric high-speed thin-wall injection molding machine uses the form of a servo motor to realize the opening and closing mode, ejection and ejection, raw material injection and storage, etc., which are fast and precise, which greatly improves or improves. Our production environment and production efficiency.
The difference between high-speed thin-wall injection molding machine and ordinary injection molding machine:
1. The high-speed thin-wall injection molding machine is highly efficient, and the high-speed thin-wall injection molding machine adopts the three-axis linkage mode. In simple terms, it is the three-circuit. The high-speed thin-wall injection molding machine is formed as follows: mold clamping - injection molding - cooling - mold opening - gap time.
2, the molding process of the ordinary injection molding machine is the mode-locking - injection - cooling - storage - mold opening - tray - gap time.
3, high-speed thin-wall injection molding machine is more environmentally friendly, and the ordinary injection molding machine uses a standard pump, which is very polluting in terms of electricity, hydraulic oil and noise.
In summary, the high-speed thin-wall injection molding machine is an oil-electric hybrid type using an oil pump and a servo motor. The advantages of the servo hydraulic system are as follows: the implementation of the soft start mold, it will not affect the power network, in order to avoid the pollution of voltage and electric radiation, we can effectively prevent the oil temperature of the injection molding machine from being too high, preferably Cooling is good, and the replacement rate of hydraulic oil is greatly reduced. The servo hydraulic system has a good click and power system gear pump, which not only reduces the machine operation and noise, but also improves the working environment. Compared with the total power of ordinary injection molding machines, high-speed thin-wall injection molding machines can save 60~70% of electricity and greatly reduce product cost.